Have you noticed a strange wide residue building up on your showerheads? Although you might be tempted to ignore this problem, you should actually address it as soon as possible. That residue you see is mineral buildup, and it can lead to low water pressure. As you might imagine, it can become quite a hassle to take a shower when you’re dealing with poor water flow.
Fortunately, you can learn how to clean a showerhead all on your own. There are some simple methods that will make your showerhead look new and prevent unwanted mineral deposits from causing trouble for your household.
Are you ready to start? Let’s discuss some top tips to clean your showerhead as thoroughly as possible!
Why Do Showerheads Get Dirty?
Before we can discuss how to clean a showerhead, it’s important to know what you’re up against. Although it’s easy to forget, the water going to your showerhead contains some mineral deposits. This problem can be even more of an issue if you have hard water.
Hard water has an unusually high mineral content that can leave a film behind on your skin and create stains on glasses or silverware. This particular issue can also lead to a clogged showerhead if you aren’t careful.
When you take a shower and notice that the water pressure is low, your first thought might be to schedule a plumber repair service in Temecula, CA. However, this probably isn’t necessary. Instead, the easy solution might be to simply clean your showerhead. We’ll go over how you can do this below.
Use the Cleaning Properties of Vinegar
When discussing tips to clean your showerhead, it’s impossible not to mention vinegar! This household staple is excellent at removing mineral deposits — and there’s an easy way to use it without having to dismantle the showerhead.
First, fill a plastic bag with a cup of distilled vinegar (or at least enough vinegar to fill half of the bag). After you’ve done this, secure the bag to the showerhead with a zip tie or rubber bands. You might need to double-loop the rubber band on the shower arm, depending on how loose the bag is. Once you’re certain that the showerhead is properly submerged, it’s time to let the vinegar sit and do its job.
How Long Should You Soak Your Shower Head in Vinegar?
The answer to this question will depend on the type of showerhead you have. If the fixture is made of brass, you should only let the showerhead soak in vinegar for 30 minutes. If not, you can let the process go on for a few hours — or overnight if you prefer.
When learning how to clean a showerhead, it’s important to note that your experience may differ from someone else’s. If you let the showerhead soak overnight instead of 30 minutes, that’s completely fine! This is all about finding a solution that works for you and your needs.
Once you’re done letting the showerhead soak, remove the bag and dump the remaining vinegar down the drain. Following this simple step can help remove any soap scum that has potentially gathered in the drain. Finally, you’ll want to run the hot water for a few minutes to flush out any remaining mineral deposits.
Bring Out an Old Toothbrush
Are you fresh out of vinegar? No worries; you can use baking soda and lemon juice instead! Grab an old toothbrush and create a paste by mixing together baking soda and a little bit of lemon juice.
Do you have your paste? It’s time to start scrubbing. Coating the toothbrush in the paste, thoroughly scrub the showerhead — but remember to be gentle. During this process, you can choose to remove the head from the shower arm, but you certainly don’t have to if you don’t want to.
As you can see, there isn’t a one-size-fits-all solution when it comes to learning how to clean a showerhead. If you have baking soda and lemon juice at the ready, you may find that this method is the most practical — and that’s great!
Clean the Filter Screen
Do you want to make sure your showerhead is as clean as possible? Since we’re going over tips to clean your showerhead, we have to mention the importance of cleaning the filter screen from time to time.
During this process, you’ll need to remove the showerhead and remove the filter screen. In some cases, you can remove the filter screen with a pair of needle-nose pliers or tweezers. Once you’ve successfully removed the screen, rinse it under water or place it in a bowl of vinegar to soak.
Every showerhead is different and has different requirements when it comes to the filter screen, so remember to consult the user’s manual for further information.
Upgrade Your Plumbing Fixtures With Guardian Plumbers!
Are you tired of dealing with a dirty showerhead? We hope these tips to clean your showerhead come in handy — whether you want to address the problem today or avoid a buildup of mineral deposits in the future.
To avoid mineral build up all together, investing in a whole home water filtration system is your best option. Whole home water filtration units are great for many reasons, not only to keep your shower heads clean, but it also provides clean drinking water free from harmful minerals.
Our team of plumbing professionals has seen and done it all, from drain cleaning to toilet repair in Temecula, CA, in the surrounding areas. Contact us today to see what we can do for you!